Markeren:
Zuurwaarde: |
15-25 |
Actief ingrediënt: |
50 |
Verschijning: |
Kleurloze tot lichtgele vloeistof |
Cas: |
11-30-5 |
Verenigbaarheid: |
met een gewicht van niet meer dan 10 kg |
Dosering: |
00,5-2,0% op basis van de totale samenstelling |
Functie: |
voor automobielcoatings op basis van oplosmiddelen, voor industriële coatings |
Steekproef: |
Beschikbaar op aanvraag |
Solide inhoud: |
30-40% |
Stabiliteit: |
Stabiel onder normale opslagomstandigheden |
Type: |
Blockcopolymer met lage polariteit |
Geldigheid: |
2 jaar |
ANJEKA-6176
GENERAL INFORMATION
It is used as a wetting and dispersing additive for solvent-borne automotive and industrial coatings and pigment concentrates. Particularly suitable for stabilizing highly pigmented carbon blacks and organic pigments, especially in two-component polyurethane and baked enamel systems, with a significant reduction of the viscosity of the abrasive.
PRODUCT DATA
Chemical composition: Block copolymer solution with amino-anchored functional groups.
Typical Physical and Chemical Data:
The data given on this data sheet are typical values and are not technical specifications of the product.
| Appearance |
Pale Yellow Transparent Liquid |
| Active ingredient(%) |
50 |
| Density g/cm³(23℃) |
1.00 - 1.20 |
| Amine value(mg KOH/g) |
2 - 40 |
| Solvent |
Ethylene Glycol Diacetate (EGDA) |
APPLICATION GUIDELINES
It unflocates and stabilizes pigments by spatial site resistance.It provides an equal charge to the pigment particles. The resulting repulsive and spatial stabilization prevents possible co-flocculation and prevents color float and bloom in multi-color systems. The result is an increase in gloss, color strength, transparency and hiding power, as well as a reduction in milling viscosity.
APPLICATION SECTORS
| Industrial Coatings |
● |
| Automotive coatings |
● |
| Architectural coatings |
○ |
| Anti-corrosion coating systems |
○ |
●--Special Recommendations; ○--Recommendations
STORAGE and TRANSPORT
Delamination or turbidity may occur at temperatures below 0°C. Heating to 20°C and mixing thoroughly will not affect the performance.
Storage time is not recommended to exceed 12 months.
SPECIAL NOTES
The surface treatment of some organic pigments may adversely affect the effectiveness of the wetting and dispersing agent. In such cases, untreated pigments of the same type may be used. When used in coil coatings, the interaction between the cationic additive and the acid catalyst must be considered. Free or epoxy-encapsulated acids are preferable to amine-encapsulated acids.
RECOMMENDED LEVELS
Additive dosage (in purchased form) is based on pigment:
Titanium dioxide: 5%-6%
Inorganic pigments: 10%-15
Organic pigments: 30%-80%
Carbon black: 70%-140
The above figures are empirical and the optimum dosage should be determined by a series of tests.
INCORPORATION and PROCESSING INSTRUCTIONS
For best performance, premix the grinding resin and solvent components, then add Anjeka-6176 with stirring; after the grinding resin and solvent are well mixed, add the pigment with stirring. Pigments should not be added until the additives are well mixed.
PACKAGING
-25kg iron drum with inner coating
-180kg ring plastic drum
Our service:
| 1 |
Custom Solutions |
Tailored additive solutions for your specific coating/ink system. |
| 2 |
Problem Solving |
Expert in fixing floating, pinholes, settling, leveling issues. |
| 3 |
Performance Boost |
Enhances stability, gloss, durability for competitive edge. |
| 4 |
Cost Efficiency |
Optimizes dosage and process to reduce total costs. |
| 5 |
Full Support |
End-to-end technical partnership from lab to production. |
Our team:
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
Uw bericht moet tussen de 20-3.000 tekens bevatten!
