Markeren:
ANJEKA-6911 Wetting and dispersing agent for unsaturated polyester and epoxy system
GENERAL DESCRIPTION
Anjeka-6911 is a wetting and dispersing additive for unsaturated polyester and
epoxy systems that stabilizes inorganic pigments, especially titanium dioxide, and
significantly reduces the viscosity and improves the flow of the mixture.
PRODUCT DATA
Chemical composition: Copolymer blends containing acidic groups
Typical physical and chemical data:
The data given on this data sheet are typical values and are not product
specifications.
Appearance: Yellow liquid
Acid value (mg KOH/g) 130-230
Density g/cm³ (23°C) 1.00-1.30
Viscosity cps (25℃) 300-3000
Active ingredient (%): 100
STORAGE and TRANSPORT
Delamination or turbidity may occur at temperatures below 10℃, and can be
recovered by heating to 30℃-40℃.
Storage time is not recommended to exceed 12 months.
APPLICATION SECTORS
This additive is recommended for solvent-borne and solvent-free systems to
stabilize inorganic pigments, especially titanium dioxide. Anjeka-6911 stabilizes
inorganic pigments, especially titanium dioxide, and effectively reduces system
viscosity, improves system fluidity, increases gloss and reduces haze.
RECOMMENDED LEVELS
Dosage of additives: (W/W) Based on inorganic filler or pigment 0.5%-1%.
The above data are empirical, the optimal amount should be determined through a
series of tests.
INCORPORATION AND PROCESSING INSTRUCTIONS
For best performance, add the dispersant to the resin first and then add the filler or
pigment.
PACKAGING
-25kg iron drum with inner coating
-200kg ring plastic drum
Our service:
| 1 |
Custom Solutions |
Tailored additive solutions for your specific coating/ink system. |
| 2 |
Problem Solving |
Expert in fixing floating, pinholes, settling, leveling issues. |
| 3 |
Performance Boost |
Enhances stability, gloss, durability for competitive edge. |
| 4 |
Cost Efficiency |
Optimizes dosage and process to reduce total costs. |
| 5 |
Full Support |
End-to-end technical partnership from lab to production. |
Our team:
Uw bericht moet tussen de 20-3.000 tekens bevatten!
