GENERAL DESCRIPTION
Anjeka-5064 is a defoamer for water-based coatings. Excellent anti-foaming properties, can be used in varnish, color paint formulations, and pure propylene emulsion systems, benzene propylene emulsion systems, PU dispersions, epoxy emulsions, water-soluble resins and other water-dilutable systems have good compatibility
PRODUCT DATA
Chemical composition: modified polyether siloxane liquid.
Typical physical and chemical data:
The data given in this data page are only typical values, not technical specifications of the product.
| Property |
Value |
| Appearance |
Transparent liquid |
| Density g/cm³ (23℃) |
0.96-1.06 |
| Active ingredient (%) |
100 |
STORAGE and TRANSPORT
Layering may occur at temperatures below 5 °C. Heat to 20 °C and mix thoroughly before use.
Storage is not recommended for more than 12 months.
STORAGE and TRANSPORT
The full effect of the defoamer will not be realized until 24 hours after it has been put into the system.
APPLICATION GUIDELINES
Industrial Coatings
Features and Benefits:
Anjeka-5064 is used in aqueous systems with excellent foam inhibition and defoaming properties and solves the risk of shrinkage and can be added later.
APPLICATION SECTORS
Aqueous industrial coatings, screen inks, UV inks.
RECOMMENDED LEVELS
0.05-1.0% Additives (in purchased form) are based on total formulation.
The above data are empirical and the optimum dosage should be determined through a series of tests.
INCORPORATION and PROCESSING INSTRUCTIOS
For best performance, add before grinding or mixing for best foam inhibition, or add later, but mix well.
PACKAGING
- -25kg iron drum with inner coating
- -180kg ring plastic drum
Uw bericht moet tussen de 20-3.000 tekens bevatten!
