Markeren:
UV topcoat dispersant additive
, pigment wetting dispersing agent
, viscosity reducing paint additive
Anjeka 6111A Industrial coating Oil-Based high-filler viscosity reduction epoxy floor coating additives adhesive dispersant
GENERAL DESCRIPTION
Anjeka-6111A improves pigment wetting and is a wetting and dispersing additive for solvent-borne and solvent-free coatings and inks to reduce the time required for the grinding process and to stabilize pigment dispersion. It is effective in stabilizing inorganic pigments, especially titanium dioxide, and effectively reduces the viscosity of the grinding slurry.
PRODUCT DATA
Chemical composition: Copolymer with acidic groups
Typical physical and chemical data:
The data given in this data sheet are typical values, not product specifications.
Appearance Yellow transparent liquid
Acid value (mg KOH/g) 40-120
Density g/cm³ (23℃) 1.00-1.20
Viscosity cps (25℃) 300-3000
Active ingredient (%) 100
STORAGE and TRANSPORT
Layering and turbidity may occur at temperatures below 10˚C. Heat to 20˚C and mix thoroughly before use.
Storage time is not recommended to exceed 12 months.
SPECIAL NOTES
This product should be stored in airtight containers and should not be re-stored after pre-dilution.
APPLICATION GUIDELINES
Coating Industry
Features and Benefits.
Anjeka-6111A is mainly used in high solids and solvent-free coatings. Due to its anionic properties, it is very suitable for acid-catalyzed systems (e.g. coil coatings). Anjeka-6111A stabilizes inorganic pigments, especially titanium dioxide, which increases gloss, reduces haze, and reduces the viscosity of the abrasive considerably, and can be used in combination with pigment pastes stabilized with the Anjeka series of additives. It can be used together with pigment pastes stabilized with Anjeka additives.
APPLICATION SECTORS
Industrial coatings ●
Automotive coatings ●
Coil coatings ●
Anti-corrosion coating systems●
●--Special Recommendations; ○--Recommendations
RECOMMENDED LEVELS
The amount of additives (in purchased form) is based on the pigment:
Inorganic pigments: 2%-5%
Titanium dioxide: 1%-3%
The above data are empirical, the optimum dosage should be determined by a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIONS
In order to obtain the best performance, the additives should be added to the abrasive before the pigments.
PACKAGING
-25kg iron drum with inner coating
-180kg ring plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
Our company:
Our Certifcate&Patents:
Uw bericht moet tussen de 20-3.000 tekens bevatten!
