Anjeka6062B polymer dispersant suitable for solvent-based and solvent-free systems Automotive Coatings BYK163

GENERAL DESCRIPTION

Anjeka-6062 is suitable for solvent-based and solvent-free systems, has excellent dispersing performance and wide compatibility with various systems, and is highly recommended for general-purpose thickener dispersion.

PRODUCT INFORMATION

Chemical composition: Solution of block copolymer containing pigment-friendly groups.

Typical Physical Chemistry Data:

The data given on this data sheet are typical values and are not technical specifications of the product.

Appearance: Transparent yellow liquid

Acid value (mg KOH/g) 1-15

Amine value (mg KOH/g) 1-15

Density g/cm³ (23℃) 0.80-1.00

Viscosity cps (25℃) 5-250

Active ingredient (%) 40

Solvent Xylene

STORAGE AND TRANSPORT

It should be stored in a cool and dry place. Mix thoroughly before use, delamination or turbidity may occur at temperatures below 0°C. Heat to 20°C and mix thoroughly.

Storage time is not recommended to exceed 12 months.

APPLICATION MESSAGE

Industrial Coatings

Features and Benefits:

This additive causes pigment deflocculation by spatial site resistance. Due to the small particle size of the deflocculated pigments, a high gloss can be achieved, as well as an increase in color strength. In addition, the transparency of transparent pigments and the hiding power of opaque pigments are improved, the flow properties are improved due to the reduction of viscosity, and the pigment content of the color paste is increased.

APPLICATION SECTORS

Anjeka-6062 has good compatibility with alkyd resins, cellulose, chlorinated rubber, epoxy, polyurethane, polyester, and acrylate, and is especially suitable for high solids systems due to its high solids content.

Industrial Coatings ●

Automotive Coatings ●

Architectural Coatings ○

Printing inks ○

●--Special recommendation; ○--Recommendation

RECOMMENDED LEVELS

The following additions are based on the ratio of dispersant solids to pigment volume:

Inorganic pigments: 5%-10%

Titanium dioxide: 1%-3%

Organic pigments: 10%-35

Carbon black: 15%-75

The above data are empirical, the optimal amount should be determined through a series of tests.

INCORPORATION and PROCESSING INSTRUCTIONS

For optimum performance, add the pigment before it is added at the milling stage.

PACKING

-25kg iron drum with inner coating

-180kg ring plastic drum

Our team:

We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity

of 6,000 tonnes.

The interface additives project was officially established in the Songzi Chemical Park in November 2022.

Benefits to our customers and partners:

Stable large-scale production with enhanced quality control

Lower unit production cost

Collaboration Opportunities:

Contract manufacturing

OEM / ODM partnerships