Markeren:
Verschijning: |
lichtgele vloeistof |
Sollicitatie: |
Gebruikt in de coatingindustrie en drukinkten |
kookpunt: |
> 100°C |
Chemische Component: |
Polymeer dat amidegroepen bevat |
Verenigbaarheid: |
Compatibel met anorganische pigmenten, organische pigmenten en carbonblacks, vooral voor robuuste an |
dichtheid g/cm3: |
1,05-1,15 g/cm3 |
Actief ingrediënt: |
100% |
Opslagtijd: |
12 maanden |
Aminewaarde (mg KOH/g): |
10 tot 30 |
Opslag: |
Op een koele, droge plaats bewaren |
Zuurwaarde (mg KOH/g): |
1-5 |
GENERAL DESCRIPTION
Anjeka-6061 is a polymeric dispersant containing amide groups. It is designed primarily for dispersing inorganic pigments, organic pigments, and carbon blacks in solvent-borne and solvent-free coating systems, as well as printing inks. The additive exhibits particular efficacy in heavy-duty anti-corrosion coating formulations..
PRODUCT DATA
Chemical composition: polymers containing amide groups
Typical physical and chemical data:
The data given on this data sheet are typical values and are not technical specifications of the product.
Appearance: Light yellow liquid
Acid value (mg KOH/g) 1-5
Amine value (mg KOH/g) 10-30
Density g/cm³ (23℃) 1.05-1.15
Active ingredient (%) 100
STORAGE and TRANSPORT
Store in a cool, dry and ventilated place. Storage time is not recommended to exceed 12 months.
APPLICATION GUIDELINES
Coating industry and printing inks
Characteristics and advantages:
The additive unflocates and stabilizes the pigments by means of spatial resistance. Due to the small size of the deflocculated pigment particles, multicolor systems are free of color float and bloom. This results in increased gloss, color strength, transparency, and hiding power.
color strength, transparency and hiding power of the paint. The additive reduces the viscosity of the slurry, thus improving flow and increasing the amount of pigment added.
APPLICATION SECTORS
This additive is recommended for solvent-borne and solvent-free coatings, printing inks and for dispersing inorganic pigments, organic pigments and carbon blacks.
RECOMMENDED LEVELS
The amount of additives (in purchased form) is based on the pigment:
Inorganic pigments: 1%-2%
Titanium dioxide: 0.5%-1%
Organic pigments: 1%-5%
Carbon black: 30%-60
The above data are empirical, the optimum amount should be determined through a series of tests.
INCORPORATION and PROCESSING INSTRUCTIOS
In order to obtain the best performance, the additives should be added to the abrasives first, and then the pigments.
PACKAGING
-25kg iron drum with inner coating
-200kg ring plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3. R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our Certifcate&Patents:
Uw bericht moet tussen de 20-3.000 tekens bevatten!
