Markeren:
fluorine-modified silicone defoamer
, silicone defoamer for solvent-borne coatings
, UV system defoamer additive
Verschijning: |
kleurloze transparante vloeistof |
Sollicitatie: |
Oplosmiddel-gevoerde coatings en UV-systemen. |
Verenigbaarheid: |
een goede balans tussen ontfoonende eigenschappen en compatibiliteit. |
Emulgatievermogen: |
Goed |
Stabiliteit: |
Stabiel onder normale omstandigheden |
Organisch Siliciumschuimwerend middel: |
Ja |
GENERAL DESCRIPTION
Anjeka-5066N is a high-performance silicone defoamer designed for solvent-borne and solvent-free coating and ink systems. Its concentrated formula ensures efficient foam control with low addition levels.
PRODUCT DATA
Chemical composition: Foam-breaking polymeric silicone solution.
Typical Physical and Chemical Data:
The values provided in this data sheet are typical and are not to be construed as product specifications.
Appearance: Colorless Transparent Liquid
Solvent: Isophorone
Active Ingredient (%): 1
Density (g/cm³ at 23°C): 0.70-0.90
STORAGE and TRANSPORT
Layering and turbidity may occur at temperatures below 5 °C. Heat to 20 °C and mix thoroughly before use.
Storage is not recommended for more than 12 months.
SPECIAL NOTES
The full effect of the defoamer can only be obtained after 24 hours in the system.
APPLICATION GUIDELINES
Industrial Coatings
Features and Benefits:
Anjeka-5066N is a highly effective defoamer that provides optimum defoaming with a minimum of incompatibilities. It can be used in all solvent based systems. It provides a good balance between defoaming properties and compatibility.
APPLICATION SECTORS
Solvent-borne coatings and UV systems.
RECOMMENDED LEVELS
0.1-0.7% Additives (in purchased form) are based on the total formulation.
The above data are empirical and the optimum dosage should be determined through a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIOS
For optimum performance, the defoamer should be added to the grinding media prior to grinding. If added at a later stage, the shear force must be high enough to ensure good dispersion of the defoamer to prevent shrinkage.
PACKING
-25kg iron drum with inner coating
-180kg ring plastic drum
Our Services:1 Customized Additive Solutions Develop fully tailored wetting agents, dispersants, and defoamers optimized for your unique coating, ink, or adhesive formulations.2 Targeted Defect Resolution Professional troubleshooting for common issues including color floating, pinholes, pigment settling, cratering, and poor leveling.3 Superior Performance Enhancement Significantly improves color strength, gloss, weather resistance, and overall system stability to give your products a clear market advantage.4 Cost-Optimized Formulations Reduces additive consumption and streamlines production processes for lower overall formulation costs without compromising quality.5 Comprehensive Technical Support Complete partnership from initial lab testing and formula development through to full-scale production and ongoing optimizationOur team:
Our company:
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
Benefits to our customers and partners:
Stable large-scale production with enhanced quality control
Lower unit production cost
Collaboration Opportunities:
Contract manufacturing
OEM / ODM partnerships
Our Certifcate&Patents
Uw bericht moet tussen de 20-3.000 tekens bevatten!
