Anjeka 4330A High flash point polyethylene anti-sinking wax paste 150#solvent oil not effect gloss excellent anti-sagging directional effect on metallic pigments non-hazardous

ANJEKA-4330A

GENERAL DESCRIPTION

High flash point polyethylene anti-sinking wax paste for non-hazardous coating and ink systems.

PRODUCT DATA

Chemical composition: A dispersed polyethylene wax.

Typical physical and chemical data:

The data given on this data sheet are typical values and are not technical specifications of the product.

Appearance: Translucent white flowing paste

Active ingredient (%): 10

Solvent: 150# solvent oil

STORAGE and TRANSPORTATION

Store the product in a cool and ventilated place, keep the container tightly closed and away from heat and ignition sources. The container in which the product is stored should not be exposed to direct heat radiation. Store the product between 0°C and 40°C (recovery to 25°C is required for use, the product is soft and waxy at 0°C).

Storage time is not recommended to exceed 12 months.

SPECIAL NOTES

Please test the compatibility with the coating system before use.

APPLICATION

Characteristics and advantages:

Appearance is flowable slurry, suitable for high-speed dispersing equipment, easy to take, easier to disperse.

Provides excellent anti-settling effect and has no significant effect on viscosity.

Maintains viscosity stability, even if there is a slight settlement, it is easy to stir, and will not be deposited at the bottom of the tank.

No activation is required, and the anti-settling effect is not affected by the dispersion temperature.

Anti-settling effect is not affected by solvent or resin polarity.

It has no significant effect on the gloss, yellowing resistance, water resistance and drying speed of the coating film.

Fields of application:

Suitable for alkyd/amino baking paint, acrylic/amino baking paint, aluminum powder paint, epoxy resin, vinyl resin, polyurethane coating, solvent-based ink.

No need to grind, can be used as a post addition. Especially suitable for pigments that cannot be ground. For example, anti-sinking of aluminum paste, pearlescent powder, matte powder, fluorescent pigment.

When used in aluminum powder, it can help the aluminum scale arrangement and orientation, and enhance its luster.

RECOMMENDED LEVELS

For the whole amount: 1.0-5.0%. It can be added at any stage without grinding, but it should be stirred well.

The above data are empirical and the optimum dosage should be determined through a series of tests.

INCORPORATION and PROCESSING INSTRUCTIOS

Anjeka-4330A should be added to the resin first and dispersed evenly at high speed before adding other raw materials such as aluminum powder and solvents, etc., and mixing at a low shear rate.

PACKAGING

-50kg plastic drum

-200kg ring plastic drum

Service