Farewell to Floating and Flooding & Hard Settling: Unveiling the Dual-Effect "Controlled Flocculation" Technology of Anjeka-6104S

In the production and application of multi-color paints such as industrial paints, floor coatings, and anti-corrosion coatings, "floating/flooding" and "pigment settling" are two persistent challenges most frequently encountered by formulation engineers and procurement personnel. Uneven color affects product appearance consistency, while hard settling leads to application difficulties, performance degradation, and even waste. Traditional single-function additives often address one issue at the expense of the other. The innovation of Anjeka's Anjeka-6104S lies in its unique "controlled flocculation" mechanism, combining excellent anti-floating/flooding capability with significant anti-settling effect into one, providing a one-stop solution for the long-term stability of multi-color paint systems.

I. In-Depth Analysis of Pain Points: The Root Causes of Floating, Flooding, and Settling
Floating and flooding essentially result from the separation of colors caused by the different migration rates of various pigments (such as titanium dioxide, organic pigments, and carbon black) during film drying, due to differences in particle size, density, and surface polarity within the system. Hard settling, on the other hand, occurs due to insufficient pigment dispersion stability, leading to aggregation and sinking under gravity during storage. The two often occur together, jointly challenging the stability and application properties of the coating system.

II. Core Solution: The Unique "Controlled Flocculation" Technology
Anjeka-6104S does not achieve stability by completely isolating pigment particles but creatively employs the principle of "controlled flocculation." It enables the formation of a loose, controlled network flocculation structure between different pigments and extender pigments. This structure12:

Locks in Color: Effectively restricts the free movement of different pigment particles, thereby fundamentally preventing floating and flooding.
Supports Particles: The formed three-dimensional network structure can support pigment particles, significantly slowing down or preventing the formation of hard settling12.
Synergistic Effect: The product also contains polysiloxane copolymers, which further enhance the anti-floating effect and improve film surface leveling and slip. This can sometimes eliminate the need for additional silicone leveling agents.

III. Performance Verification: Multi-System Testing, Reliable Performance
Laboratory data fully demonstrates the broad applicability and reliability of Anjeka-6104S:

Broad-Spectrum Anti-Floating/Flooding: In multi-color paint tests using various resin systems such as thermoplastic acrylic, hydroxy acrylic, polyester, and epoxy, Anjeka-6104S effectively eliminated floating and flooding phenomena.
Flexible Process Adaptability: Whether added before grinding (for better pigment wetting) or after grinding (for easy post-adjustment), its anti-floating/flooding effect has been verified, providing flexibility for the production process.
Significant Anti-Settling Effect: In the same tests, Anjeka-6104S showed a reduction in pigment settling ratio, with the post-addition method yielding better anti-settling results in systems like acrylic and alkyd.
Solving Practical Formulation Challenges: For common floating issues in gray systems (such as floating white or black) in floor coatings and industrial paints, Anjeka-6104S is listed by the technical team as an effective solution recommendation.

IV. Application Guide: How to Use Anjeka-6104S Efficiently

Applicable Systems: Particularly suitable for solvent-based and solvent-free coating systems of medium to high polarity, such as epoxy, polyester, acrylic, and alkyd resins, widely used in industrial, architectural, anti-corrosion, and automotive coating fields. It can also be used in amine-neutralized water-based systems.
Typical Problems: An ideal choice for solving floating when titanium dioxide is compounded with colored pigments, uneven color in gray paints, and preventing hard settling.
Addition Recommendation: Generally added based on the total pigment content. Recommended ranges: titanium dioxide 0.5%-2.5%, inorganic pigments 3%-10%, organic pigments 10%-20%. It is recommended to add it to the grinding material first and disperse it thoroughly for optimal results.

Stability is the cornerstone of coating quality. Facing the challenges of floating and settling in multi-color paints, choosing an additive with a scientific mechanism and proven effectiveness is crucial. Anjeka-6104S, with its unique "controlled flocculation" technology, provides you with a dual-effect stability guarantee.